ka

Wholesale Good Quality Abrasive disk brass center e nang le 7/8 ″ Coarse Medium Fine

Tlhaloso e Khutšoanyane:

Khamphani ea rona e ikemetseng ea lipatlisiso le nts'etsopele ea disc e potlakileng ea Abrasive e nang le setsi sa koporo, lisebelisoa tsa disc li na le Aluminium oxide, Silicon carbide, Garnet, Sand lisebelisoa tse 'ne.

e loketseng bakeng sa ho bentša mabenyane a sebelisoang hangata khauta, silevera le litšepe tse ling tse bonolo.E arotsoe ka botenya tse tharo tse fapaneng, tse mahareng le tse ntle, 'me bohareng ke lesoba la koporo ea lisekoere, e lokelang ho sebelisoa le Right Angle Mandrel.Mandrel e entsoe ka tšepe e sa hloekang, Ntle le ho kenya lisekoere tse loketseng, e ka fokotsa le ho thothomela ha disc ea ho sila.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela:

Khamphani ea rona e ikemetseng ea lipatlisiso le nts'etsopele ea disc e potlakileng ea Abrasive e nang le setsi sa koporo, lisebelisoa tsa disc li na le Aluminium oxide, Silicon carbide, Garnet, Sand lisebelisoa tse 'ne.

e loketseng bakeng sa ho bentša mabenyane a sebelisoang hangata khauta, silevera le litšepe tse ling tse bonolo.E arotsoe ka botenya tse tharo tse fapaneng, tse mahareng le tse ntle, 'me bohareng ke lesoba la koporo ea lisekoere, e lokelang ho sebelisoa le Right Angle Mandrel.Mandrel e entsoe ka tšepe e sa hloekang, Ntle le ho kenya lisekoere tse loketseng, e ka fokotsa le ho thothomela ha disc ea ho sila.

Li-discs tsa aluminium oxide tse nang le setsi sa koporo

E entsoe ka aluminium oxide, e khubelu e sootho ka 'mala·Resin e tlanngoeng holim'a pampiri e tšesaane e tenyetsehang e ka morao·Li-discs li tšoarella nako e telele ebile ha li na metsi·E loketse bakeng sa ho boreleli le ho bentša lirafshoa tse sa fereheng le tsa bohlokoa·Max.lebelo 30,000 rpm

Mahoashe: grit 80, 7/8" lebokose la 50pcs

Bohareng: grit 120, 7/8" lebokose la 100pcs

E ntle: grit 320, 7/8" lebokose la 100pcs

Li-discs tsa silicon carbide tse nang le setsi sa koporo

E entsoe ka Silicon carbide, e sootho ka 'mala·li-disc tsa sanding li tšesaane ebile lia tenyetseha·Sebelisa bakeng sa ho belisa pele, ho qeta halofo le ho kopanya·

E loketse ho sebelisoa litšepe tse se nang ferrous, litšepe tsa bohlokoa, platinum·Max.lebelo 30,000 rpm

Mahoashe: grit 80, 7/8" lebokose la 50pcs

Bohareng: grit 120, 7/8" lebokose la 100pcs

E ntle: grit 320, 7/8" lebokose la 100pcs

Li-discs tsa lehlabathe tse nang le setsi sa koporo

E entsoe ka Lehlabathe ka tšehetso e tšesaane e tenyetsehang·Ka ho khetheha designe bakeng sa tšebeliso ea mabenyane·Liphetho tse ntle ka ts'ebetso ea sanding le ho kopanya·Max.lebelo 30,000 rpm

Mahoashe: grit 80, 7/8" lebokose la 100pcs

Bohareng: grit 120, 7/8" lebokose la 100pcs

E ntle: grit 240, 7/8" lebokose la 100pcs

Li-discs tsa garnet tse nang le setsi sa koporo

E entsoe ka Lehlabathe ka tšehetso e tšesaane e tenyetsehang·Bakeng sa ho qetela hantle le ho bentša ha li-composite le litšepe·Max.lebelo 30,000 rpm

Mahoashe: grit 80, 7/8" lebokose la 100pcs

Bohareng: grit 120, 7/8" lebokose la 100pcs

E ntle: grit 220, 7/8" lebokose la 100pcs

Mokhoa oa ho sebelisa:

Ha u sebelisa, penya karolo e ka tlase ea sephethephethe, 'me u kenye sengoathoana sa clamping.Kamora nako e telele, chip e tla oa, e bonts'a hore elasticity ea clamp ha ea lekana, 'me clamp e hloka ho nkeloa sebaka.


  • E fetileng:
  • E 'ngoe:

  • Lihlahisoa tse Amanang